Customers Testimonials

Along with the data logging we decided to do some in-house training to help educate our maintenance staff on the fundamentals of a compressed air system. COMAIRCO team played a very important role in developing our staff and educating our team. We were able to identify why our system was not efficient and why our air dryer was not able to meet the demand of the system.

In the winter of 2013 we decided to partner with COMAIRCO to help service our existing compressors and air dryer. This was one of our best decisions. COMAIRCO completely rebuilt our dryer and we made it through our first winter with no issues in the plant.

After reviewing our system architecture with COMAIRCO sales representatives we recognized a need for a 500 gal vertical air receiver prior to the dryer. We installed the tank and never had an issue with the desiccant beds since.

In the spring of 2014 we decided to investigate the benefits of a refrigerant dryer. COMARICO team were on site to review the benefits and scope of work with us. We decided the electrical cost savings alone quantified the investment over 2 years. After we installed the refrigerant dryer we were very surprised by the cost savings. So we decided to install flow meters. We did some of our own in-house data logging and found the refrigerant dryer was saving us about $2,000 a month during the warmer months of the year. We did not want to go back to the non-heated dryer in the winter but we were forced to.  This opened the discussion of a heated blower purge drying system. Again, COMAIRCO sales representatives spent the time to explain the benefits of the system, and in the fall of 2015 we replaced our antiquated desiccant dryer with a new heated blower purge drying system. The results were amazing. In the winter of 2015-2016 we ran our plant with 200 less HP. We were able to have only one 200 HP compressor online. This was the first time in the history of our system that we did not need 2-250 HP compressors running all winter.

Our partnership with COMAIRCO has been one of our most successful collaborations. Our education of compressed air systems has been elevated and we are grateful for having companies like COMAIRCO and SULLAIR in our network of friends.

Success story with a portable compressor

 

This letter will act as a reference for those firms considering doing business with Comairco Ltd.

We took delivery a 1600 CFM portable compressor and large construction grade desiccant compressed air dryer from Comairco Ltd in the fall of 2010. This system is used in purging water from gas lines throughout the province. The equipment has performed well and reliably to date and we are very satisfied. We have also been satisfied with Comairco’s after sales support and service, not to mention the site training that was provided to our team after the equipment was delivered.

Moreover, when we first started looking at this project it was our intention to purchase an oil-free compressor with a considerably higher price tag. The Comairco salesman convinced us that this was overkill for our process and that we could accomplish our objectives perfectly with an oil-cooled screw compressor as long as there was adequate filtration. This has proven to be true. The equipment specified has proven to be more than adequate to handle the job.

So satisfied are we with the equipment and with the Comairco team that we would have no hesitation in purchasing additional equipment from them or in recommending them as a compressed air supplier to other firms.

We have been a customer of Comairco’s for approximately 15 years.

 

We recently were very pleased with the speed and efficiency that Comairco reacted with when we were in urgent need of a loaner. The procuring and installation of the rental was quick and efficient. A plant our size cannot afford downtime due to a lack of compressed air.

Comairco also recently sold us a 2000 Gallon Air Receiver with a flow controller. This equipment was specified as a result of an air audit, also conducted by Comairco. Rather than reflexively recommending yet another compressor, Comairco took a methodical approach to our compressed air requirements by adding the big receiver and flow controller, which resulted in us being able to shut down a compressor, resulting in substantial energy and dollar savings.

Comairco also services our many compressors, and I have to say we are quite satisfied.

Please treat this letter as a reference for Comairco’s products and services, and for dealing with their sales team.  I offer it without hesitation.

Sullair perfect for us!

 

To whom it may concern:

I am the CEO of a large company producing meat.

We have been a customer of Comairco Ltd. for many years. We recently purchased a new Sullair compressed air system from Comairco for a new plant that we will soon be opening.

In addition to providing us with reliable equipment, Comairco also services our existing Sullair compressors into all of our facilities.

We are very satisfied with Comairco and our sales representative from both equipment and a service standpoint. Our sales representative is always prompt to return our calls and diligent in recommending the optimum equipment for our operating environment.

We are pleased with our business relationship with Comairco and have no reservations in recommending them to other potential customers.

Testimonial from a furniture manufacturer

 

Our plant’s compressed air system consists of 2 X 75 HP rotary screw compressors which are set to operate in a run/back-up configuration. We first met with Comairco’s sales rep in December 2015. Our manufacturing manager had called in Comairco due to the fact that the compressors were running at night when there was no production. We also noticed that at times both compressors were running during peak demand, leaving us without a back-up. The question had come up if we needed larger horsepower compressors to keep up with demand. However, after reviewing our load profile Comairco’s representative correctly concluded that air leaks were the culprit, and that larger horsepower compressors were not required, nor would they solve the problem. Once we detected and repaired the plant air leaks, the above noted problems were resolved, and we were once again able to meet plant air demands with a single compressor.

Earlier this year we decided that one of our compressors as well as an air dryer needed to be replaced. Comairco came through with a competitive bid that took care to specify a machine able to withstand a hot and dusty ambient environment while still operating hydro efficiently. The equipment was delivered, professionally installed and commissioned when promised. There were no delays or excuses.

Tuthill successful story

I want to thank you so much for the outstanding job you did in organizing and meeting our requirements for our critical shipment picked up at Tuthill Vacuum and Blower Systems in March 2019.  You went above and beyond for us and we are very thankful and I look forward to future orders in which your expertise will be provided.